ISO INTERNATIONAL STANDARD 8116-9 First edition 1991-11-01 Textile machinery and accessories -- Beams for winding -- Part 9: Dyeing beams for textile fabrics Materiel pour I'industrie textile -- Ensoupies pour enroulement - Partie 9: Ensouples de teinture pour étoffes Reference number ISO 8116-9:1991(E) Not for Resale ISO 8116-9:1991(E) Foreword Iso (the International Organization for Standardization) is a worldwide federation of national standards bodies (isO member bodies). The work of preparing Internationait Standards is normally carried out through iso technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, mental and non-governmental, in liaison with Iso, also take part in the work. iso collaborates closely with the International. Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an Inter- national Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard IsO 8116-9 was prepared by Technical Committee ISO/TC 72, Textile machinery and allied machinery and accessories, Sub-Committee sc 4, Dyeing, finishing and allied machinery and ac- cessories. Iso 8116 consists of the following parts, under the general titie Textile machinery and accessories -- Beams for winding: - Part 1: Vocabulary -- Part 2: Warper's beams - Terminology and main dimensions - Part 3: Weaver's beams - Terminology and main dimensions Part 4: Quality classification of flanges for weaver's beams, 一 warper's beams and sectional beams Part 5: Sectional beams for warp knitting machines --- Terminology and main dimensions - Part 6: Beams for ribbon weaving and ribbon knitting -- Termin- ology and main dimensions Part 9: Dyeing beams for textile fabrics CISO1991 or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Organization for Standardization asePostale56 CH-1211Geneve 20 Switzerland Printed in Switzerland Not for Resale ISO 8116-9:1991(E) INTERNATIONAL STANDARD Textile machinery and accessories -- Beams for winding - Part 9: Dyeing beams for textile fabrics 1 Scope Types of beams 3 This part of 1so 8116 specifies the terminology, The following types of beams are covered by this principal dimensions and designation of dyeing part of IsO 8116: beams for textile fabrics. a) type A -- beam without driving hole (see figure 1): Normative reference 2 b) type B -- beam with driving hole (see figure 2). The following standard contains provisions which, through reference in this text, constitute provisions Terminology and principal dimensions of this part of iso 8116. At the time of publication, the edition indicated was valid. All standards are (see figures 1 and 2 and table 1) subject to revision, and parties to agreements based on this part of iso 8116 are encouraged to investi- fabric width a gate the possibility of applying the most recent edi- nominal width tion of the standard indicated below. Members of IEC and ISO maintain registers of currently valid width of the perforated zone International Standards. d,. overall diameter Is0 1505:1982, Textile machinery and allied machin- ery and accessories - Dyeing and finishing equip- d, = fitting diameter ment -- Working widths and nominal widths. radius of pitch circle of 'driving holes e Copyright International Organization for Standardization