论文标题
深色植入设备的无线动力效率
Wireless powering efficiency of deep-body implantable devices
论文作者
论文摘要
无线功率传递效率对植入的生物电子设备受到频率依赖性物理机制的约束。最近的著作开发了几种数学公式,以了解这些机制并预测最佳的工作条件。但是,现有方法依赖于简化的身体模型,这些模型无法捕获无线功率传输的重要方面。因此,本文提出了解剖模型中的效率分析方法,这些方法可以提供有关达到最佳操作条件的洞察力。首先,通过理论球形波扩展分析来验证该方法,并比较了简化的球形模型和人类胸腔模型的结果。结果表明,尽管磁性接收器的表现优于近场操作的电动接收器,并且两种来源都可以在远场范围内同样使用,但在中场,根据植入深度,在1-5 GHz之间实现了最大效率。接收器方向是影响效率的另一个因素,在电源的五次左右,最佳和最差的场景之间的差异最大,而磁性源则超过13倍。这种方法用于分析由体内发射器无线驱动并遭受随机错位的情况。我们评估了效率和暴露效率,并演示了如何对缓冲发射器进行定制以达到最大的供应效率。最后,通过提出的方法获得的结果确定了导致最佳植入无线功率传输系统的设计指南。
The wireless power transfer efficiency to implanted bioelectronic devices is constrained by several frequency-dependent physical mechanisms. Recent works have developed several mathematical formulations to understand these mechanisms and predict the optimal operating conditions. However, existing approaches rely on simplified body models, which are unable to capture important aspects of wireless power transfer. Therefore, this paper proposes the efficiency analysis approach in anatomical models that can provide insightful information on achieving the optimum operation conditions. First, this approach is validated with a theoretical spherical wave expansion analysis, and the results for a simplified spherical model and a human pectoral model are compared. The results show that although a magnetic receiver outperforms an electric one for near-field operation and both sources could be equally employed in far-field range, it is in mid-field that the maximum efficiency is achieved with an optimum frequency between 1-5 GHz depending on the implantation depth. The receiver orientation is another factor that affects the efficiency, with a maximum difference between the best and worst-case scenarios around five times for the electric source and over 13 times for the magnetic one. This approach is used to analyze the case of a deep-implanted pacemaker wirelessly powered by an on-body transmitter and subjected to stochastic misalignments. We evaluate the efficiency and exposure, and we demonstrate how a buffered transmitter can be tailored to achieve maximum powering efficiency. Finally, design guidelines that lead to optimal implantable wireless power transfer systems are established from the results obtained with the proposed approach.