BS EN1SO 17892-4:2016 Bsl Standards Publication Geotechnical investigation and testing Laboratory testing of soil Part 4: Determination of particle size distribution (IS0 17892-4:2016) bsi. BSENISO17892-4:2016 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 17892-4:2016. It partially supersedes BS 1377-2:1990, specifically clause 9. The UK participation in its preparation was entrusted to Technical Committee B/526/3, Site investigation and ground testing. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. @ The British Standards Institution 2016 Published by BSI Standards Limited 2016 ISBN9780580853814 ICS 13.080.20; 93.020 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Amendments/corrigenda issued since publication Date Text affected EN IS0 17892-4 EUROPEANSTANDARD NORME EUROPEENNE EUROPAISCHE NORM November 2016 ICS13.080.20;93.020 Supersedes CENIS0/TS17892-4:2004 English Version Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution (IS0 17892-4:2016) Reconnaissance et essais geotechniques - Essais de Geotechnische Erkundung und Untersuchung - Laborversuche an Bodenproben - Teil 4: Bestimmung laboratoire sur les sols -Partie 4:Détermination de la distribution granulometrie des particules (ISO 17892- der Korngrofenverteilung (IS0 17892-4:2016) 4:2016) This European Standard was approved by CEN on 25 September 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. cen EUROPEAN COMMITTEE FOR STANDARDIZATION COMITE EUROPEEN DE NORMALISATION EUROPAISCHESKOMITEEFURNORMUNG CEN-CENELECManagementCentre:AvenueMarnix17,B-1000Brussels @2016CEN All rights of exploitation in any form and by any means reserved Ref.No.EN ISO 17892-4:2016 E worldwide for CEN national Members BSENISO17892-4:2016 EN IS0 17892-4:2016 (E) European foreword This document (ENIS017892-4:2016) has been prepared by Technical Committee IS0/TC182 "Geotechnics"in collaboration with Technical Committee CEN/TC 341"Geotechnical Investigation and Testing"the secretariat ofwhich is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2017, and conflicting national standards shall be withdrawn at the latest by May 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. ThisdocumentsupersedesCENIS0/TS17892-4:2004 According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following