8400 International Standard (ISO INTERNATIONALORGANIZATIONFOR STANDARDIZATIONMEKAYHAPOAHAA OPTAHW3AUMA NO CTAHAAPTW3ALMM·ORGANISATION INTERNATIONALEDENORMALISATION Cinematography - Position of emulsion surface of 16 mm motion-picture prints - Identification First edition - 1985-04-01 UDC 778.5 Ref. No. 1ISO 8400-1985 (E) O 8400-1985 (E) Descriptors :cinematography, motion-picture film, motion-picture film 16 mm,photographic emulsions:position (location). Price based on 2 pages Copyright International Organization for Standardization Not for Resale Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, govern- mental and non-governmental, in liaison with iso, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting. International Standard ISO 8400 was prepared by Technical Committee ISO/TC 36, Cinematography. International Organization for Standardization, 1985 ? Printed in Switzerland ed without license from IHS Not for Resale ISO 8400-1985 (E) INTERNATIONAL STANDARD Cinematography - Position of emulsion surface of 16 mm motion-picture prints - Identification 1 Scope and field of application This international Standard describes a method for identifying the relationship of the image geometry to the emulsion surface of 16 mm motion-picture prints. 2 Description and identification 2.1 For identification, the film shall be viewed (as shown in the figure in the reading position), with the head end at the top, the. scene or title reading correctly from left to right and, where present, the sound track on the right hand side. Head Title Title Composite print Picture record Sound track record Figure 2.2 The orientation shall be identified as Type A if the emulsion surface is towards the observer, when viewed as described in 2.1. 2.3 The orientation shall be identified as Type B if the emulsion surface is away from the observer, when viewed as described in 2.1. 3Bibliography ISO 25, Cinematography -- Camera usage of 16 mm motion-picture film -- Specifications. 1 Copyright International Organization for Standardization ensefrom IHS Not for Resale