ISO INTERNATIONAL STANDARD 8056-4 First edition 1987-07-01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATION MEXKAYHAPOAHAAOPTAHW3ALMAOCTAHAAPTM3ALWM Aircraft -- Nickel-chromium and nickel-aluminium thermocouple extension cables Part 4: Crimp-type butt connectors - Dimensions Aéronefs - Cables de compensation de couples thermoélectriques en nickel-chrome et en nicke/-aluminium Partie 4: Connecteurs bout a bout du type a sertir - Dimensions Referencenumber ISO 8056-4: 1987 (E) intiInft Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (iSO member bodies). The work of preparing International Standards is normally carried out through Iso technical committees. Each member body interested in a subject for which a technical committee has been established has mental and non-governmental, in liaison with IsO, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting. International Standard ISO 8056-4 was prepared by Technical Committee ISO/TC 20, Aircraft and spacevehicles. Users should note that all International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its latestedition,unlessotherwisestated. ? International Organization for Standardization,1987 Printed in Switzerland E"eqr(ijigf'd"WPG.gpqxc.84:226"Ocftf.Urckp"cm"tkjwtugtxgf+wp"Hgd3:22-5846"WVE"4246 ranvintiInf ISO 8056-4:1987 (E) INTERNATIONAL STANDARD Aircraft - Nickel-chromium and nickel-aluminium thermocouple extension cables - Part 4: Crimp-type butt connectors - Dimensions 0 Introduction controlsystemswithflexiblethermocoupleextensioncablesof the nickel-chromium and nickel-aluminium types at a nominal This International Standard on nickel-chromium and nickel- voltage of 600 V and a maximum frequency of 2 000 Hz. aluminium thermocouple extension cablesfor use in aircraft comprises thefollowingfourparts: NOTE- The general requirements and tests for terminations are Part1:Conductors--General requirementsandtests. specified in ISO 8056-2. Part 2: Terminations - General requirements and tests. 1) Part 3: Crimp-type ring terminal ends -- Dimensions. Part 4: Crimp-type butt connectors -- Dimensions. 2 Dimensions, conductor size range and cable insulation range Scope and field of application This part of iso 8056 lays down the dimensions for crimp-type The dimensions, conductor size range and cable insulation butt connectors for use in aircraft temperature indicator and range shall be in accordance with the values given in the table. 1)At present at the stage of draft.