INTERNATIONAL ISO STANDARD 3550-2 First edition 1997-09-01 ANSI Internat Doc Sec Cigarettes Determination of loss of tobacco from the ends Part 2: Method using a rotating cubic box (sismelatophore) Cigarettes -- Détermination de la perte de tabac par les extremites - Partie 2: Methode utilisant une boite rotative cubique (sismelatophore) ISO Reference number ISO 3550-2:1997(E) right International Organization for Standardizatior Provided by IHS under license with ISC Not for Resale ISO 3550-2:1997(E) Foreword bodies (iso member bodies). The work of preparing International Standards is normally carried out through iso technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. international organizations, governmental and non-governmental, in liaison with isO, also take part in the work. Iso coilaborates ciosely with the International Electrotechnical Commission (IEC) .on all matters of electrotechnical standardization. Draft Internationai Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 3550-2 was prepared by Technical Committee ISO/TC 126, Tobacco and tobacco products, Subcommittee Sc 1, Physical and dimensional tests. Is 3550 consists of the following parts, under the general title Cigarettes -- Determination of loss of tobacco fromthe ends: Part 1: Method using a rotating cylindrical cage Part 2: Method using a rotating cubic box (sismelatophore) ISO1997 All rights reserved. Uniess otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm,withoutpermissioninwritingfromthepublisher. International Organization for Standardization Case postale 56 . CH-1211 Geneve 20 . Switzerland internet [email protected] X.400 C=ch; a=400net;p=iso; 0=isocs; S=centraf PrintedinSwitzeriand i No reproduction or networking permitted without license from IHS Not for Resale @ISO ISO 3550-2:1997(E) Introduction The loss of tobacco from cigarette ends, which particularly affects short strands, is a nuisance for the industry as well as for the consumer. From this standpoint, the greater a cigarette's resistance to loss from its ends, the higher its quality. The measuring devices available are based on the rotation of a cigarette-containing device. This International Standard describes two particular types of devices. The first, described in ISO 3550-1, second, described in this part of iso 3550, uses a cubic box rotating about its main diagonal axis. The first system principally permits determination of losses undergone by the cigarette during the manufacturing and packaging processes, and the second one losses undergone throughout the distribution network and in the smoker's pocket. The two methods are not mutually exclusive and other acceptable methods exist which are based upon slightly different types of device. ili Not for Resale