ISO INTERNATIONAL STANDARD 13539 First edition 1998-08-01 Earth-moving machinery Trenchers Definitions and commercial specifications Engins de terrassement - Trancheuses Définitions et spécifications commerciales ISO Referencenumber ISO 13539:1998(E) IHSunder Not for Resale ISO 13539:1998(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (isO member bodies). The work of preparing International Standards is normally carried out through isO technical committees. Each member body interested in a subject for which a technical committee has been established has liaison with isO, also take part in the work. isO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Subcommittee SC 4, Commercial nomenclature, classification and rating. @ISO1998 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic InternationalOrganizationforStandardization Case postale 56·CH-1211Geneve20·Switzerland Internet iso@iso.ch Printed in Switzerland national Organization for Standardization from IHS Not for Resale INTERNATIONAL STANDARD @ISO ISO13539:1998(E) Earth-moving machinery Trenchers Definitions and commercial specifications 1 Scope This International Standard defines terms and specifies the content of commercial literature specifications for self- propelled trenching machines, and their equipment, as defined in clause 3. 2 Normative references International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision,andparties to agreementsbasedon thisInternational Standard areencouraged toinvestigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. IsO 3450:1996, Earth-moving machinery-Braking systems of rubber-tyred machines—Systems and performance requirements and test procedures. IsO 5010:1992, Earth-moving machinery - Rubber-tyred machines - Steering requirements. IsO 6014:1986, Earth-moving machineryDetermination of ground speed. and components. IsO6165:1997,Earth-movingmachinery—Basictypes—Vocabulary. Iso 6746-1:1987, Earth-moving machinery Definitions of dimensions and symbols - Part 1: Base machine. IsO 7457:1997, Earth-moving machinery-Determination of turning dimensions of wheeled machines. Iso 8812:—1), Earth-moving machinery—Backhoe loaders —Definitions and commercial specifications IsO9249:1997,Earth-moving machinery—Engine test codeNetpower. ISo 10265:1998, Earth-moving machinery- Crawler machines- Performance requirements and test procedures forbrakingsystems. 1) To be published. Copyright Int