BS IS0 14649-13:2013 BSl Standards Publication Automation systems and integration - Physical device control Data model for computerized numerical controllers Part 13: Process data for wire electrical discharge machining (wire-EDM) bsi. BSIS0 14649-13:2013 BRITISH STANDARD National foreword This British Standard is the UK implementation of IS0 14649-13:2013. The UK participation in its preparation was entrusted to Technical Committee AMT/4, Industrial data and manufacturing interfaces. A list of organizations represented on this committee can be obtained on request to its committee manager. Contractual and legal considerations This publication has been prepared in good faith, however no representation, warranty, assurance or undertaking (express or implied) is or will be made, and no responsibility or liability is or will be accepted by BsI in relation to the adequacy, accuracy, completeness or reasonableness of this publication. All and any such responsibility and liability is expressly disclaimed to the full extent permitted by the law. This publication is provided as is, and is to be used at the recipient's own risk. The recipient is advised to consider seeking professional guidance with respect to its use of this publication. This publication is not intended to constitute a contract. Users are responsible for its correct application. @ The British Standards Institution 2023 Published by BSI Standards Limited 2023 ISBN 9780 580 669736 ICS25.040.20 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2023. Amendments/corrigenda issued since publication Date Textaffected BS IS0 14649-13:2013 INTERNATIONAL ISO STANDARD 14649-13 First edition 2013-03-01 Automation systems and integration Physical device control Data model for computerized numerical controllers - Part 13: Process data for wire electrical discharge machining (wire-EDM) Systemes d'automatisation et integration - Commande des dispositifsphysiques-Modelede données pourles controleurs numeriques informatisés Partie 13: Données de procéde pour I'usinage de fils électriques (fils EDM) Reference number IS0 14649-13:2013(E) LSO @ IS0 2013