BS ISO BRITISH STANDARD 3019-2:2001 Incorporating corrigendum no. 1 Hydraulic fluid power Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors- Part 2: Metric series ICS 23.100.99 BSi NOCOPYINGWITHOUTBSIPERMISSIONEXCEPTASPERMITTEDBYCOPYRIGHTLAW British Standards BS IS0 3019-2:2001 National foreword This British Standard was published by BSI. It is the UK implementation of ISO 3019-2:2001, incorporating corrigendum December 2006. BS ISO 3019-1:2001 and BS ISO 3019-2:2001 supersede BS 6276:1987 which is withdrawn. The start and finish of text introduced or altered by corrigendum is indicated in the text by tags ~ TM . Text altered by ISO corrigendum December 2006 is indicated in the text by ~%o. The UK participation in its preparation was entrusted to Technical Committee MCE/18, Fluid power systems and components. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard, having Amendments issued since publication beenprepared underthe direction of the Engineering Sector Committee, was Amd. No. Date Comments published under the authority oftheStandardsCommittee 16976 28 February 2007 See national foreword and comes into effect on 15 August 2001 Corrigendum No. 1 C BSI 2007 ISBN 0 580 38021 1 ISO INTERNATIONAL STANDARD 3019-2 Third edition 2001-06-01 Incorporating corrigendum December2006 Hydraulic fluid power Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors Part 2: Metric series Transmissions hydrauliques-Dimensions et code d'identification des flasquesdemontageetdesboutsd'arbresdespompesvolumetriqueset moteurs- Partie 2: Série metrique Reference number ISO 3019-2:2001(E) ISO