(ISO International Standard 7077 02-62-5 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION MEKAYHAPOAHAR OPrAHW3ALM nO CTAHAAPTW3ALWW-ORGANISATION INTE RNATIONALE DE NORMALISATION Measuring methods for building -- General principles and procedures for the verification of dimensional compliance Methodes de mesurage pour la construction - Principes generaux pour la verification de la conformite dimensionnelle First edition 1981-10-01 UDC 69 : 621.753.1 : 531.7.08 Ref. No. ISO 7077-1981 (E) D 7077-1981 ( Copyright InternationalOrganization for Standardization Price based on 2 pages Not for Resale Foreword ISo (the International Organization for Standardization) is a worldwide federation of national standards institutes (Iso member bodies). The work of developing Inter- body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with IsO, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the Iso Council. International Standard ISO 7077 was developed by Technical Committee ISO/TC 59, Building construction, and was circulated to the member bodies in April 1980. It has been approved by the member bodies of the following countries : Australia Finland Korea, Rep. of Belgium Norway France Brazil Germany, F. R. Poland Bulgaria Hungary Romania Cuba India South Africa, Rep. of Ireland Cyprus Spain Czechoslovakia Israel Sweden Denmark Italy United Kingdom Egypt, Arab Rep. of Japan Yugoslavia The member body of the following country expressed disapproval of the document on technical grounds : Netherlands @ International Organization for Standardization,1981 Printed in Switzerland Not for Resale without license from IHS INTERNATIONAL STANDARD ISO 7077-1981 (E) Measuring methods for building -- General principles and procedures for the verification of dimensional compliance 0 Introduction 5 General International Standards dealing with the application of these 5.1 Compliance measurements for the operation of setting principles are currently being prepared. out the location of the building (or other projects) as a whole are carried out to confirm the relationship between the building and the physical features in the immediate environment. 1 Scope Compliance measurements for all other operations including setting out within the building are carried out to verify com- pliance with the specified permitted deviation. This International Standard indicates the principles to be ap- plied for carrying out dimensional compliance controf measurements in building construction. It deals with com- 5.2 The following items shall be listed in the inspection pliancemeasurementsforsettingoutcomponentmanufacture schedule : and assembly, and the building as a whole. a) all operations to be subjected to compliance measure- ments; 2 Field of application b) information about the time of these measurements? This International Standard applies to all types of building con- c) information about the physical reference conditions; struction. d) description and details of methods of measurements; e) any other matters pertaining to compliance measure- 3 References ments. ISo 1803, Tolerances for building - Vocabulary.1) 5.3 The list of items given in the inspection schedule should notprevent theadditionof otheroperations if it should prove ISo 4463, Measurement methods in building - Setting out necessary to obtain compliance measurements of them.2) and measurement -- Permissible deviations. Iso 4464, Tolerances for building -- Relationship between the 6 Procedures different types of deviation. 6.1 Accuracy of compliance measurements When carrying out compliance measurements, it is necessary 4 Definitions to ensure that the measurement procedure will give .a suffi- ciently accurate result. 4.