3024 International Standard (ISO INTE RNATIONAL ORGANIZATION FOR STANDARDIZATIONMEXAYHAPOAHAA OPrAHW3AUMR IO CTAHAAPTM3AUMWORGANISATION INTE RNATIONALE DE NORMALISATION Cinematography - Motion-picture camera cartridge, 8 mm type S, model I - Camera run length, perforation cut-out and end-of-run notch in film Specifications Cinematographie -- Chargeur, modele I, pour camera 8 mm type S -- Longueur de film entraine, encoche d'elimination de perforation etencochedefindeprisedevues- Spécifications Second edition - 1983-10-01 UDC 778.5 : 771.333 : 771.531.352 Ref. No. 1SO 3024-1983 (E) SO 3024-1983 Descriptors : cinematography, motion picture film, motion picture film 8 mm, length, dimensions, specifications. Price based on 3 pages Copyright International Organization for Standardization Not for Resale Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (IsO member bodies). The work of developing International Standards is carried out through IsO technical committees. Every member body interested in a subject for which a technical committee has been authorized has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with Iso, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISo Council. International Standard ISO3024was developed byTechnical CommitteeISO/TC 36, Cinematography, and was circulated to the member bodies in May 1982. It has been approved by the member bodies of the following countries : Austria France Mexico Canada Germany, F.R. USA Czechoslovakia Italy USSR Denmark Japan No member body expressed disapproval of the document. This second edition cancels and replaces the first edition (i.e. ISo 3024-1975). @ International Organization for Standardization, 1983 Printed in Switzerland Copyright International Organization for Standardization nse from IHS Not for Resale ISO 3024-1983 (E) INTERNATIONAL STANDARD Cinematography Motion-picture camera cartridge, 8 mm type S, model I - Camera run length, perforation cut-out and end-of-run notch in film - Specifications 1 Scope and field of application 3 715 perforation pitch intervals 15,73 m (51.6 ft). (See the note.) The overall length of the film is to be determined by the This International Standard gives specifications for the camera manufacturer and shall provide the camera run length run length, perforation cut-out notch, and end-of-run notch in specified. film supplied in NOTE - A nominal pitch, based on 72 perforation pitch intervals per 8 mm type S model I motion-picture film camera car- tridges of 15 m (50 ft) and 60 m (200 ft) nominal capacity; foot, of 4,234 mm (0.166 7 in) is assumed for all comparisons of the number of perforation pitch intervals in a given film length. and 8 mm type S model I sound motion-picture film camera cartridges of 15 m (50 ft) and 60 m (200 ft) nominal 3.1.2 The length of the film returned to the customer shall capacity. contain a minimum customer return length of 3 600 perforation pitch intervals. The customer return length shall be that portion It also gives specifications for the length of film returned to the of the camera run length available for subject matter. The customer. customer return length starts at least 13 perforation pitch inter- vals 55 mm (2.17 in), after the frame located at the camera The purpose of this International Standard is to provide a aperture, as the cartridge is supplied by the manufacturer, and uniform basis for the operation of footage counters in cameras. ends at least 37 perforation pitch intervals 157 mm (6.18 in), before the perforation cut-out. (See the annex, clause A.1.) 2 References 60 m (200 ft) capacity cartridge 3.2 Iso 1780, Cinematography - Motion-picture camera car- tridge, 8 mm type S, model I -- Apertur